GS Molecular decomposer

recycling system


Decomposer MOLECULAR

The decomposition process is used to recycle a wide range of waste, are excluded from the decomposition the following materials: ceramics; metals; glass; rubber (for example automobile tires are not processed, etc.). To optimize the efficiency of the plant it is proposed with two tanks for 6 cubic meters each, where it is loaded the waste material and a single boiler to move under pressure 2.45 MPa or 24.5 kg/cm2 and at a certain temperature. In the moment in which the material is processed inside the first tank it is loaded the second tank, the boiler is then made to work with a continuous cycle by diverting the flow of water vapor from tank to tank. The empty/full ratio must not be less than 0.5, with some types of material and this ratio to be achieved through the crushing of waste. Each process has a net duration of 1.40 hours which must be added about 20 minutes of accumulated maintenance work at the end of the day so considering the whole day, you get to play 12 daily cycles then about 72 cubic meters per day of waste processed. After the trial we have the same volume and 15-20% more weight of material (purity material). As for the ordinary maintenance make a daily check, control and cleaning (1 person). Delivery order: 4 months.

Characteristics of the output:

  • → biofertilizer (the quality depends on the pressure and the temperature);

  • → large presence of organic substance 80% (the quality depends on the pressure and the temperature);

  • → presence of antagonists of pathogenic bacteria;

In addition, with some particular additives we have the production of a certain quantity of natural gas (CH3), which can power the process. We can also test the materials provide by the customer. The substrate product is used to carry biological production coming to a full re-use of the treated material forward given the great contribution of nutrient present in the product takes a little substrate material to make products of high quality.